HELPLINE NO 08454 505299
3
ORIGINAL INSTRUCTIONS
• Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional operation
of the device. Ensure the switch
is in the off-position before
connecting to power source,
picking up or carrying the
tool.
Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites
accidents.
• Remove any adjusting tools e.g.
allan keys before turning the power
tool on.
A wrench or a key left attached
to a moving part of the power tool may
result in personal injury.
• Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts.
Loose clothes,
jewellery or long hair can be caught in
moving parts.
• If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
4) Power tool use and care
• Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool will
do the job better and safer at the rate for
which it was designed.
•
Do not use the power tool if the
On/Off switch does not work!
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
•
Disconnect the plug from the
power source before making
any adjustments, changing
accessories , or storing power
tools.
Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to
operate the power tool.
Power tools
are dangerous in the hands of untrained
users.
• Maintain power tools. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
If damaged, have the power tool
repaired before use.
Many accidents
are caused by poorly maintained power
tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
• Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could result
in a hazardous situation.
5) Service
• Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
