HELPLINE NO 08454 505299
14
ORIGINAL INSTRUCTIONS
• When the base plate 6 fully lays on the work-piece, continue sawing along the desired cutting
line.
Cutting metal
When sawing metal, coolant/lubricant should be applied alongside cutting line to ensure the
blade remains cool.
TROUBLE SHOOTING
Jigsaw has no power
Laser or light is not working
Blade comes loose
Jigsaw does not cut straight
Laser is not aligned correctly
• Check plug fuse
• The laser, light/laser and light combinations
cycle depending on how many times the button
is pressed. See page 11 for details.
• Blade was not seated correctly. Push blade firmly
into the chuck.
• Quick release lever did not return to its normal
position. Push blade in firmly and aid the lever to
return to the correct position
• Too much forward force is being applied to the
jigsaw.
• The settings are incorrect for the material being
cut. Check the speed and pendulum settings.
• Blade is twisted or blunt. Replace blade
• Check base plate angle
• Twist the laser light so the laser aligns with the
groove on the base plate
• Blade is twisted or blunt. Replace blade
Note: Some sparking from the motor may be visible through the venting of this unit and is normal.
Further advice on usage or faults is available by contacting the service centre
on 08454 505299.
• Before any work on the machine itself remove the plug from the mains socket.
• Always keep the machine and ventilation slots clean.
• Regularly check to see if any dust or foreign matter has entered the grills near the motor and
around the trigger switch. Use a soft brush to remove any accumulated dust.
• Wear safety glasses to protect your eyes whilst cleaning and using the unit.
• If the body of the tool needs cleaning, wipe it with a soft damp cloth. A mild detergent can be
used but nothing like alcohol, petrol or other cleaning agent.
• Never use caustic agents to clean plastic part.
• Lubricate all moving parts at regular intervals.
MAINTENANCE AND CLEANING
CAUTION!
Water must never come into contact with the tool.
