background image

Cordless Hedge Trimmer

ORIGINAL INSTRUCTIONS

         

         WARNING!

 

Read all instructions. Failure to follow all 

instructions listed below may result in electric 

shock, fire and/or serious injury. The term 

“power tool” in all warnings listed below refers 

to your mains operated power tool.

1. 

Read the instruction carefully.

 Be 

familiar with the controls and the proper use 

of the appliance. Read and understand the 

operator’s manual and observe the warnings 

and instruction labels affixed to the appliance.

2. 

Users.

 Never allow children or people 

unfamiliar with these instructions to use the 

appliance. Local regulations may restrict the 

age of operator. Never operate the tool under 

the influence of alcohol, medication or drugs.

3. 

Use appropriate tool.

 This device is only 

intended for cutting and trimming hedges and 

bushes outdoors and only designated for use 

on private property. Do not force small tools or 

attachments to do the job of a heavy duty tool.

4. 

Keep work areas clean.

 Cluttered areas 

can cause accidents.

5. 

Consider work area environment.

 Do not 

expose the tool to high humidity or rain. Do 

not use the tool in damp and wet conditions. 

Keep the work area well lit. Do not use the 

tool where there is a risk of causing fire or 

explosion, e.g. in the presence of flammable 

liquids and gases.

6. 

Keep all bystanders, children, and pets 

away.

 The operator or user is responsible for 

accidents or hazards occurring to other people 

or the property.

7. 

Dress appropriately.

 Do not wear loose 

clothing or jewelry, as these can be caught in 

moving parts. Preferably wear non-slip 

GENREARL POWER TOOL

SAFETY WARNINGS

 

Thank you for purchasing an CHALLENGE  

Hedge Trimmer.

We  hope you are completely satisfied with 

your new product and hope you will enjoy 

using this tool for many years.

Your M0E-3ET-460 Hedge Trimmer has been 

designed for trimming light foliage and is 

intend for DIY use only

INTRODUCTION

footwear when working outdoors. Wear 

protective hair covering to keep long hair out 

of the way.

8. 

Head protection. 

Always use safety 

glasses and gloves. Use a face or dust mask 

whenever the operations may produce dust or 

flying particles. Wear ear protection whenever 

the sound level seems uncomfortable.

9. 

Do not overreach. 

Keep proper footing and 

balance at all times.

10. 

Stay alert, watch what you are doing. 

Use common sense when operating the 

appliance. Do not operate the tool when you 

are tired.

11. 

Grip the tool securely. 

Operator should 

have one hand on the main handle, the other 

on the front handle. Keep finger off trigger until 

ready to use.

12. 

Remove adjusting keys and wrenches.

Always check that adjusting keys and 

wrenches are removed from the tool before 

operating the tool.

13. 

Risk of cut. 

Do not touch or try to stop the 

cutting blades when they are moving.

14. 

Disconnect the battery.

 Disconnect 

plug from the tool when not in use or when 

servicing or cleaning.

15. 

Check for damaged parts. 

Before further 

use, carefully check the tool for damage. 

Check for alignment of moving parts, binding 

of moving parts, breakage of parts, mounting 

and any other condition that may affect its 

operation.

Do not use the tool if any parts are damaged 

or defective. Have any damaged or defective 

parts repaired or replaced by an authorized 

service agent. Never attempt any repairs 

yourself.

16. 

Avoid unintentional starting.

 Do not 

carry the tool without disconnect the plug and 

be sure the tool is switched off.

17. 

Use an extension cord suitable for 

outdoor use when operating a power tool 

outdoors.

 Using a cord suitable for outdoor 

use reduces the risk of electric shocks.

18. 

If operating a power tool in a damp 

location is unavoidable, use a residual 

current device(RCD) protected supply. 

Use 

of an RCD reduces the risk of electric shock.

19. 

Store idle tools.

 When not in use, tools 

should be stored in a dry, locked-up place out 

of reach of children.

Cordless Hedge Trimmer

ORIGINAL INSTRUCTIONS

         

         WARNING!

 

Do not use any attachments or accessories not 

recommended by the manufacturer of this tool. 

The use of attachments or accessories not 

recommended can result in serious personal 

injury.

 

---In case of skin or eye contact, follow the 

instructions below.

---The battery fluid, a 25-30% solution of 

potassium hydroxide, can be harmful. In case 

of skin contact, immediately rinse with water. 

Neutralize with a mild acid such as lemon 

juice or vinegar. In case of eye contact, rinse 

abundantly with clean water for at least 10 

minutes. Consult a physician.

NOTE

: The batteries in your battery charger 

are the nickel-cadmium type. Cadmium is 

considered to be a toxic material by the 

Environmental Protection Agency. Before 

disposing of damaged or worn out Nickel-

Cadmium battery packs, check with your 

local Environmental Protection Agency to find 

out about special restrictions on the disposal 

of these battery packs or return them to a 

certified service center for recycling.

Chargers 

1. Charger’s plug must match the outlet. Never 

modify the plug in any way. Unmodified plugs 

and matching outlets will reduce risk of electric 

shock.

2. Use your charger only to charge batteries 

of the type supplied with your tool. Other 

batteries could burst, causing personal injury 

and damage.

3. Only 2 battery packs is allowed to be 

charged continuously in order to prevent 

overheating of charger, necessary rest time is 

required to let the charger cool down before 

further charging.

4. When charging is finished, unplug the 

charger from mains socket outlet and take 

away the battery pack from the charger, do not 

leave the battery pack in the charger.

5. Never carry the charger by its cord or pull it 

to disconnect from the socket. Keep the cord 

away from heat, oil and sharp edges.

6. Never attempt to charge non-rechargeable 

batteries.

7. The cord of the charger is not changeable, 

do not continue to use if the cord is damaged.

8. Do not expose to water or rain, do not use 

in wet condition.

9. Do not open the charger.

10. Do not probe the charger.

11. Intended for indoor use only. 

ADDITIONAL SAFETY 

INSTRUCTIONS FOR 

BATTERIES AND 

CHARGERS

Batteries

1. Never attempt to open for any reason.

2. Do not expose to water.

3. Do not incinerate the battery pack even if 

it is severely damaged or is completely worn 

out. The battery pack can explode in a fire.

4. Do not store in locations where the 

temperature may exceed 40

o

C.

5. Do not leave the battery pack in the charger 

when the charging is finished, otherwise 

battery leakage may occur.

6. Charge only at room temperature.

7. Charge only by using the charger provided 

with the tool (see technical data).

8. Before charging, make sure that the battery 

is dry and clean.

9. Use only the correct type of battery for the 

tool (see technical data).

10. When dispose of batteries follow the 

instructions given in the section "protecting the 

environment".

11. Under extreme conditions, battery leakage 

may occur. When you notice liquid on the 

battery, proceed as follows:

---Carefully wipe the liquid off using a cloth. 

Avoid skin contact.

20. 

Maintain tools with care.

 Keep tools 

clean and in good condition for better and 

safer performance. Follow the instructions for 

maintenance and changing accessories. Keep 

handles and switches dry, clean and free from 

oil and grease.

21. 

Have your tool repaired by an 

authorized service agent.

 This tool is 

manufactured in accordance with the relevant 

safety regulations. To avoid danger, electrical 

appliances must only be repaired by qualified 

technicians.

Содержание M0E-3ET-460









Отзывы: