Challenge Xtreme BMS210MS.1, Оригинальное руководство пользователя

Страница: 4 / 20

HELPLINE NO 08448012949
4
OrIgINaL INstructIONs
gENEraL safEty
warNINgs fOr yOur
LasEr
warNINg: read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in serious injury.
save all warnings and instructions for
future reference.
these lasers do not normally present an
optical hazard although staring at the
beam may cause flash blindness.
do not stare directly at the laser beam. a
hazard may exist if you deliberately stare
into the beam, please observe all safety
rules as follows:
1. the laser shall be used and
maintained in accordance with the
manufacturer’s instructions.
2. Never aim the beam at any person or
an object other than the work piece.
3. the laser beam shall not be
deliberately aimed at another person and
shall be prevented from being directed
towards the eye of a person for longer
than 0.25 seconds.
4. always ensure the laser beam is
aimed at a sturdy work piece without
reflective surfaces, e.g wood or rough
coated surfaces are acceptable.
Bright shiny reflective sheet steel or similar
is not suitable for laser applications as the
reflective surface may direct the laser beam
back at the operator.
5. do not change the laser device with a
different type. Repairs must be carried out
by the manufacturer or an authorized agent.
6. cautION: use of controls or
adjustments other than those specified
herein may result in hazardous radiation
exposure.
additional safety warning for class 2
laser
The laser device fitted to this tool is
class 2 with a maximum radiation of
3mw and 650nm wavelength.
cLass 2 LasEr radIatION, dO NOt
starE INtO bEaM