background image

HELPLINE NO 08707252949

13

PLUG REPLACEMENT

Your Power Tool is supplied with a fitted plug, however if you need to fit a new plug follow

the instruction below.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue = Neutral   Brown = Live

As the colours of the wires in the mains lead of this appliance may not correspond with the 

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be 

connected to the terminal which is marked 

with 

N

.

The  wire  which  is  coloured  brown  must  be 

connected to the terminal which is marked with 

the letter L .

If a 13 AMP (BS 1363/A) Plug is used, a 

13 AMP Fuse must be fitted, or if any other 

type of plug is used a 13 AMP Fuse must be 

fitted, either in the Plug or Adaptor, or on the 

Distribution Board.

Note:

 If a moulded plug is fitted and has to be 

removed take great care in disposing of the 

plug and severed cable, it must be destroyed to prevent engaging into a socket.

If the supply cord is damaged it must be replaced by a service agent or a similarly 

qualified person in order to avoid hazard.

Environmental protection 

    

Waste electrical products should not be disposed of with household waste. Please 

recycle where facilities exist. Check with your Local Authority or retailer for recycling 

advice.

If faults can not be remedied, contact the 

Helpline on 08707252949

GUARANTEE
This product is selected for DOMESTIC USE ONLY and not for business use.

This product is guaranteed against manufacturing defects for a period of 12 months This does not cover

the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the

product has been the subject of unauthorised modifications or alterations, or has been the subject of 

commercial use. In the event of a problem with the product within the guarantee period please return it to 

your nearest Argos store. If the item is shown to have an inherent defect present at the time of sale, the 

store will provide you with a replacement Your statutory rights remain unaffected.

Guarantor: Argos Ltd MK9 2NW

Issue 1 04/2009

Содержание BMS210K.1

















Отзывы: