Challenge Xtreme BMS210K.1, Руководство пользователя

Страница: 3 / 16

HELPLINE NO 08707252949
3
- Ensure switch is in “off” position when
plugging in
18 - Use outdoor extension leads
- When the tool is used outdoors, use
only extension cords intended for
outdoor use and so marked.
19 - Stay alert
- Watch what you are doing, use
common sense and do not operate the
tool when you are tired.
20 - Check damaged parts
- Before further use of tool, it should be
carefully checked to determine that it
will operate properly and perform its
intended function.
- Check for alignment of moving parts,
binding of moving parts, breakage
of parts, mounting and any other
conditions that may affect its operation.
- A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service centre unless
otherwise indicated in this instruction
manual.
- Have defective switches replaced by an
authorized service centre.
- Do not use the tool if the switch does
not turn it on and off.
21 - Warning
- The use of any accessory or attachment
other than one recommended in this
instruction manual may present a risk of
personal injury.
22 - Have your tool repaired by a qualified
person
- This electric tool complies with the
relevant safety rules. Repairs should
only be carried out by qualified persons
using original spare parts, otherwise
this may result in considerable danger
to the user.
23 - If the replacement of the supply cord is
necessary, this has to be done by the
manufacturer or his agent in order to
avoid a safety hazard.
24 - For tools intended to be connected to a
water supply:
– for tools provided with a PRCD: Never
use the tool without the PRCD delivered
with the tool,
– for tools provided with an isolating
transformer: Never use the tool without
the transformer delivered with the tool
or of the type as specified in these
instructions,
– Replacement of the plug or the supply
cord shall always be carried out by the
manufacturer of the tool or his service
organization,
– Keep water clear off the electrical parts
of the tool and away from persons in
the working area.
SPECIFIC SAFETY RULES
1. Do not use saw blades which are
damaged or deformed.
2. Replace the table insert when worn.
3. Use only saw blades recommended by
the manufacture.
4. Do not use saw blades made of high-
speed steel.
5. Always wear the hearing protection to
reduce the risk of induced hearing loss.
6. Always wear the eye protection when use
the tool.
7. Always wear a dust mask to reduce the
risk of inhalation of harmful dust.
8. Wear gloves when handle saw blades
(saw blades shall be carried in a holder
wherever practicable) and rough material.
9. Connect the saw to a dust collecting
device when sawing wood.
10. Select the correct saw blade for the
material to be cut.
11. Do not use the saw to cut other
materials than those recommended by the
manufacture.
12. Do not use the saw without the guards
in position, in good working order and
properly maintained.
13. Keep the floor area around the machine
level, well-maintained and free of loose