CH Hanson NORSE 9683412, Инструкция по эксплуатации и каталог запасных частей

Страница: 7 / 32

This work should be performed
by a qualified electrician.
A temporary 3-prong to 2-prong
grounding adapter is available for
connecting plugs to a two pole outlet if
it is properly grounded.
Do not use a 3-prong to 2-prong
grounding adapter unless permitted by
local and national codes and
ordinances.
(A 3-prong to 2-prong grounding adapter is not permitted in Canada.) Where permitted, the rigid
green tab or terminal on the side of the adapter must be securely connected to a permanent
electrical ground such as a properly grounded water pipe, a properly grounded outlet box or a
properly grounded wire system.
Many cover plate screws, water pipes and outlet boxes are not properly grounded. To ensure
proper ground, grounding means must be tested by a qualified electrician.
Extension Cords
• The use of any extension cord will cause some drop in voltage and loss of power.
• Wires of the extension cord must be of sufficient size to carry the current and maintain
adequate voltage.
• Use the table to determine the minimum wire size (A.W.G.) extension cord.
• Use only 3-wire extension cords having 3-prong grounding type plugs and 3-pole
receptacles which accept the tool plug.
• If the extension cord is worn, cut or damaged in any way, replace it immediately.
Extension Cord Length and Gauge (120V
Length Wire Size A.W.G.
Up to 25 ft 18
25 – 50 ft 16
NOTE: Using extension cords over 50 ft. long is not recommended.
2-Prong receptacle with adapter.
Grounding Lug
Adapter
3-Prong Plug
2-Prong
Receptacle
Make sure this is
connected to a
known grounded
receptacle.
7