CH Hanson NORSE 9683412, Инструкция по эксплуатации и каталог запасных частей

Страница: 13 / 32

TO INSTALL THE HANDLE
See Figure 9.
• Hold the nylon nut securely and turn the screw counterclockwise to remove the nut
completely.
NOTE: Do not remove the screw from the handle.
• Place the nylon nut into the recessed hole on the back of the height/bevel adjusting
handwheel and hold in place.
• Slide the handle, screw, and washer into the hole on the height/bevel adjusting
handwheel.
• Using a athead screwdriver, turn the screw clockwise and tighten in place.
TO REMOVE/REPLACE THE
TABLE INSERT
See Figure 10.
• Lower the blade by turning
the height/bevel adjusting
handwheel counterclockwise.
• Remove the table insert.
ASSEMBLY AND ADJUSTMENTS
HEIGHT/BEVEL
ADJUSTING HANDWHEEL
Fig. 9
SCREW
NYLON
NUT
WASHER
HANDLE
TABLE
INSERT
Fig. 10
13