Here are the guidelines to help you understand the symbols used in this guide.
DANGER!
Indicates a potentially hazardous situation which could result in death or serious injury.
WARNING!
Indicates a situation which could result in death or serious injury
CAUTION!
Indicates a potentially hazardous situation which could result in mild to moderate injury
NOTICE:
When used without the Safety Alert symbol, this indicates a potentially hazardous
situation which, if not avoided, can result in property damage
TABLE OF CONTENTS
SAFETY GUIDELINES
Be sure to read and understand this manual for your safety. When using this product, it is
important to read and understand this information. It will protect you and help prevent any
problems
•
KNOW YOUR POWER TOOL.
Read the operator’s manual carefully. Learn the saw’s
tool.
•
GUARD AGAINST ELECTRICAL SHOCK BY PREVENTING BODY CONTACT
WITH GROUNDED SURFACES.
For example, pipes, radiators, ranges, refrigerator
enclosures.
•
KEEP GUARDS IN PLACE
and in good working order.
•
REMOVE ADJUSTING KEYS AND WRENCHES.
Form a habit of checking to see
that keys and adjusting wrenches are removed from tool before turning it on.
•
KEEP WORK AREA CLEAN.
Cluttered areas and benches invite accidents. DO NOT
leave tools or pieces of wood on the saw while it is in operation.
•
DO NOT USE IN DANGEROUS ENVIRONMENTS.
Do not use power tools in damp
or wet locations or expose to rain. Keep the work area well lit.
•
KEEP CHILDREN AND VISITORS AWAY.
All operators should wear safety glasses
and be kept a safe distance from work area. Do not contact tool or extension cord
while operating.
•
MAKE WORKSHOP CHILDPROOF
with padlocks and master switches, or by
removing starter keys.
2
SAFETY GUIDELINES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-7
FEATURES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-9
ASSEMBLY & ADJUSTMENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-17
OPERATIONS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18-24
BLADE ADJUSTMENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25-27
MAINTENANCE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28-29
PARTS LIST
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30-31
WARRANTY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
MOUNTING THE TABLE SAW BASE ON
THE LEG STAND
•
Take the following from the table saw
base: 8 hex bolts
NOTE
•
Place the table saw base on the leg
stand. Align the holes in the table.
•
Place a bolt in each hole. Hand tighten.
•
Repeat for three remaining holes.
Tighten all hardware securely with the
socket wrench.
ASSEMBLY AND ADJUSTMENTS
12
WARNING!
Never stand directly in line with the blade or allow hands to come closer than 3 in. to the
blade. Do not reach over or across the blade. Failure to heed this warning can result in
serious personal injury.
WARNING!
To avoid serious personal injury, always make sure the table saw is securely mounted to
.
Содержание NORSE 9683412
Страница 30: ...12 30 PARTS ILLUSTRATION...
