Figure P:
Step 26:
Remove the four screws (B)
from the left side table (28) indicated
as shown. Do not discard the screws
- they will be used in the next step.
Figure Q:
Step 27:
Step 28:
-
Mount the left side
table bracket (30) to the left side
table (28) as shown, using two
of the screws previously
removed in step 25. Securely
tighten the screws.
Mount the left side
condiment tray (29) to the left
side table (28) as shown.
Secure the tray
the
remaining
using
two
screws previously
removed in step 25. Securely
tighten the screws.
16
Figure P
28
B
B
B
B
Figure Q
28
29
30
39
32
Figure R
Figure R:
Step 29:
Locate the igniter unit (39). Unscrew the igniter
button and mounting ring from the igniter module by
turning it counter clockwise while holding the main body of
the igniter module steady.
Insert the main body of the igniter module from the back
of the right-side condiment tray (32) as shown. Secure the
igniter module with the mounting ring, then re-attach the
igniter button by screwing it back onto the igniter module,
turning it clockwise until it is snug. Note: Do not over
tighten button - it will slip on the threads. In which case,
simply re-tighten the button until snug.
