9
Getting Started
1. Please follow the steps in the order that
they are presented.
2. Assemble the grill where you plan to use
it.
3. You may want to place an old towel or
cloth at the assembly site to prevent nuts
and bolts from becoming lost.
4. Some parts have sharp edges - gloves
are recommended when handling parts.
5. Have a friend help. An assistant can
make the assembly easier by holding the
parts in place while you fasten the nuts and
bolts.
6. To be ready to barbecue immediately,
have the L.P. gas cylinder filled by an
authorized L.P. dealer or cylinder exchange
center.
Unpacking the Grill Parts
1.
2. Remove and set aside all inner boxes
and parts from the master carton. Be sure to
remove all parts packed under the grill lid.
3. Remove and set aside all wrapping
paper and additional packaging from the
parts. Open all cartons and bags and lay the
parts out for easiest access. Refer to pages
34 and 35 for parts and hardware details.
A box knife may be necessary to open
cartons and bags.
4. Do not destroy carton or packing until
your grill is completely assembled and
operating to your satisfaction.
5. Most stainless panels are covered with a
clear protective sheet - this clear protective
sheet must be removed before use.
Phillips-head screwdriver (magnetic)
Pliers or adjustable wrench
Estimated time for assembly: 70 minutes.
Tools needed to assemble grill:
·
·
(tools not included)
Assembly Instructions
2
Chapter
Pinnacle Series Gas Grill
