STEP 5. If the burner fails to light properly, turn
the burner control knob off. Also turn off the L.P.
cylinder valve. Wait five minutes before
attempting to light the burner again. This will
allow time for released gas to disperse.
HINT: If the burner does not light after trying
again, turn off burner-control knob, the L.P.
cylinder valve and try match lighting the grill
once the gas has cleared.
29
Side Burner Operation
Operating the Side Burner
Use the SIDE BURNER gas control knob, PUSH IN and rotate counter-clockwise
to the HIGH position.
PRESS THE IGNITER BUTTON UNTIL IT CLICKS rapidly to light the burner.
Operating the Side Burner
Use the SIDE BURNER gas control knob, PUSH IN and rotate counter-clockwise
to the HIGH position.
PRESS THE IGNITER BUTTON UNTIL IT CLICKS rapidly to light the burner.
A
OPERATING THE SIDE BURNER
IGNITING THE SIDE BURNER
Before operating the side burner, you must
first open the burner cover. (A)
After using the side burner, wait until the unit
is completely cool before closing the burner
cover.
(Read all the steps before beginning.)
STEP 1. Check the burner venturi tubes for
blockage from an insect nest (see, “CLEANING
THE BURNER VENTURI TUBES”).
STEP 2. Ensure that the burner-control knob
is in the OFF position.
CAUTION: Do not stand with head or arms
over the grill.
STEP 3. To light using the igniter:
Push in and turn the side burner-control knob
counter-clockwise to the high (light) setting.
STEP 4. Immediately press the igniter button.
You will hear rapid clicks. Repeat if necessary.
The burner should light within 3-5 seconds.
Installing the Igniter Batteries
1. Unscrew the igniter button and remove it from
the igniter.
2. Insert the battery
into the
igniter.
3. Screw the igniter button back onto the igniter.
negative (-) end OUT
"AAA" Battery
"AA" Battery
Main Console
Main Console
Side Burner
Side Burner
