CEVIK PRO PRO 25 SILENC, Инструкция по эксплуатации

Страница: 22 / 32

22
•
The warnings, precautions and instructions in this manual do not cover all possible situations
that may arise. The good common sense of the operator and his own precaution, are factors that
can not be manufactured with the compressor.
• Always be careful when using the compressor. Keep it out of reach of observers and children.
Always work with the appropriate protective equipment for the work you are going to do (masks,
goggles, etc.)
SPECIFIC SAFETY RULES FOR AIR COMPRESSORS.
WARNING !: Compressed air is a potentially dangerous form of energy, always be very
careful when using the compressor and pay special attention to the warnings in this manual.
WARNING !: The compressor starts up unexpectedly to recharge the air in the tank, as
a result of the normal programmed work sequence.
•
Place the compressor in a clean, dry and well-ventilated area, with an ambient
temperature 5ºC,and+40ºC.
• The compressor must be located at a minimum distance of one meter from the wall or
any other obstruction that interferes with the air flow.
• Place the compressor on a smooth, level surface.
• Keep the sides and other adjoining areas clean that can pick up dust or dirt. A clean
compressor works better and lasts longer.
• Do not place rags, containers or other materials on top of the compressor that could
obstruct the ventilation openings or air intake in the fans, in order to maintain the proper
operating temperature.
• Do not force the compressor. Use it following the specifications, so it will perform
better and more safely the work for which it was designed.
• Always use the switch (5) to turn the compressor on and off. Do not use the equipment
if the switch does not work properly.
• Use the carrying handle (2)
• Always wear safety glasses to protect your eyes from objects that may be projected by
the air stream.
• Never direct the jet of sprayed liquid through the tools connected to the compressor
to it.
• When performing compressor maintenance, only spare parts or accessories
recommended by the manufacturer should be used. Follow the instructions in the
maintenance section of this manual. The use of unauthorized parts or failure to follow
maintenance instructions may result in the risk of electric shock or injury.
• Do not alter or misuse the compressor. This equipment was built with precision. Any
alteration or modification not specified is a misuse and can lead to dangerous situations.
• Never leave the compressor exposed to adverse weather conditions such as rain, fog,
snow or heavy sun.
• Repair of the compressor must only be carried out by qualified personnel. Repair or
maintenance performed by an unqualified person can create risk of injury.
• Do not manipulate, drill or weld the tank. In case of defects or rust, contact our
technical services.
EN