CEVIK PRO PRO 25 SILENC, Инструкция по эксплуатации

Страница: 25 / 32

25
TECHNICAL SPECIFICATIONS
.
TECHNICAL DATA PRO25SILENC PRO50SILENC
VOLTAGE / FREQUENCY. 1 ~ 230V. - 50Hz. 1 ~ 230V. - 50Hz.
MAXIMUM MOTOR POWER. 1.5 Hp. 1.5 Hp.
TANK CAPACITY. 24 L. 50 L.
MAXIMUM PRESSURE 8 Bar. 8 Bar.
MAXIMUM AIR FLOW. 150L / MIN. 150L / MIN.
R.P.M. 1,400 1,400
SOUND POWER (LwA). 59 dB. 59 dB.
START UP.
ATTENTION!: Before starting to operate with your new compressor, please read these
instructions carefully. The accounts to operate safely. Save them for future reference.
CONNECTION TO THE POWER SUPPLY.
Before connecting the compressor and the power supply, check that the data on the nameplate
matches the values of this and all connections are tight, to avoid air errors, bad contacts and
overheating. Connect the compressor to a socket with protection and grounding devices:
The compressor is connected to a red wire with a ground connection. This can be connected to
any 230 V ~ 50 Hz grounding socket that is protected with 16 A. Before commissioning, make
sure the red voltage matches the operating voltage indicated on the motor power plate.
Cables of great length such as, p. ex. Extension cords, winding drums, etc. they cause voltage
drops and can hinder the machine's running.
The low temperatures, lower than 5 ° C, can hinder the running of the motor.
OPERATING EXAMPLE.
ON / OFF switch (5) The compressor is
connected by pulling the button (8). To
disconnect the compressor simply press the
button.
The pressure switch has been adjusted at the
factory.
Connection and charging pressure: 6 bars.
Disconnection
All compressors are equipped with a pressure
reducer (1).
The air pressure can be adjusted by pulling
slightly upwards and turning clockwise to
increase the pressure and in the opposite
direction to reduce the pressure. After
adjusting the optimum output pressure
push the button down to secure it
pressure: 8 bars.