CEVIK PRO PRO 25 SILENC, Инструкция по эксплуатации

Страница: 24 / 32

24
COMPRESSOR ASSEMBLY.
PIECES FOR THE ASSEMBLY OF THE FILTER (9), WHEELS (10) AND RUBBER PLUGS (11).
2 2 2 2 2 1 2 2 2 2 2 2
Before carrying out assembly or maintenance, make sure that the compressor is switched off
and disconnected from the power supply and located inside the packaging:
1. The air filter.
2. The wheels together with their threaded bolts, nuts, washers and bezel.
3. The rubber block, together with its screw, washers and nut.
OPERATING PRINCIPLES.
To understand the air, the piston moves up and down inside the cylinder. In the down stroke, the
air is contracted through the inlet valve. The discharge valve remains closed. In the upward stroke
of the piston, the air is compressed. The inlet valve closes and the compressed air is forced to be
directed towards the tank through the non-return valve. In a conventional piston compressor,
the air load is maintained until reaching the maximum pressure, 8 bar. The electronic pressure
control that this compressor incorporates allows to select a lower maximum pressure limit,
which reduces the waiting time to start work.
EN