CET PMC-1302-3, Руководство пользователя

Страница: 6 / 21

6
CET Electric Technology
Chapter 2 Installation
2.1 Appearance
Figure 2-1 Appearance
Figure 2-2 Upper Connector Arrangement Figure 2-3 Lower Connectors Arrangement
2.2 Mounting
The PMC-1302-3 ESG should be installed in a dry environment with no dust and kept away from heat,
radiation and electrical noise sources.
Installation steps:

Before installation, make sure that the DIN rail is already in place.

Move the installation clip at the back of the PMC-1302-3 downward to the “unlock” position.

Align the top of the mounting channel at the back of the PMC-1302-3 at an angle against the
top of the DIN rail as shown in Figure 2-4 below.

Rotate the bottom of the PMC-1302-3 towards the back while applying a slight pressure to
make sure that the device is completely and securely fixed on to the DIN rail.

Push the installation clip upward to the “lock” position to secure the PMC-1302-3 on to the DIN
Rail.