Operating the door lock
OMEGA ACTIVE IES Page 91 of 128
7.1.3
Passive locking media (125 kHz series)
1.
Fig. 126 - touch the sensor
Touch the proximity
sensor (1).
2.
Fig. 127 - show your media
Within two seconds,
hold your authorized
locking medium (2)
in front of the
outside shield (3) of
the IES.
The reader module in the outside shield detects the locking
medium. The green LED and a short beep of the reader
module signal the enabled status.
The handle is coupled with the lock.
Use the handle of the outside shield to open the door.
If you are using a locking medium that is not
authorized to enable the IES, the light at the IES
flashes red four times and you hear four successive
beeps. In this case, the handle is not coupled with
the lock. You can operate the handle but this will
not unlock the lock.
