Fitting
OMEGA ACTIVE IES Page 67 of 128
6.
Fig. 75 - Insert the coupling unit
Insert the coupling
unit with the upper
end tilted into the
outside shield.
Make sure that the
upper silicone
bearing is inside the
tab.
7.
Fig. 76 - Insert the bottom end
Now insert the
bottom end of the
coupling unit into the
outside shield.
Use a suitable
screwdriver to
position the bottom
silicone bearing into
the tab.
NOTICE
Malfunctions may occur if the coupling unit is not
fitted properly and/or the tabs are bent!
Be sure that the tabs are not bend.
Be sure that the coupling unit is placed firmly and
flush in the outside shield.
Be sure that both silicone bearings are fitted
properly.
