3. Hold the System-Master for ca 1 second in the reading field of the locking device to end the
“authorise master media” mode.
The following signal appears:
1x long green and 1x long beep.
The “authorise master media” mode will end automatically after 5 seconds. Die new
authorisations remain stored.
The RF-Stick-Master is now authorised for the Update-Terminal.
Troubleshooting:
Signalling
Reason
Solution
During step 2:
The master media could be read but
could not be authorised:
b) The master media does not have the
correct system identification code.
a) Use a master media with the correct
system identification code.
b) You have used a locking media
instead of a master-media.
b) Use a master media.
Page
26
of
41
Update-Terminal
7 Administration
