7.3 Authorising System-Master
After the System-Master has been read into your OMEGA client, it is automatically authorised to
program the Update-Terminal. If it is not read or if you want to specify a radio cell before the first
programming, you must authorise it manually.
Required master media:
l
System-Master
Procedure:
1. Hold the System-Master for ca 1 second in the reading field of the Update-Terminal and
then remove it from the reading field.
The following signal appears:
1x short green and 1x short beep
2. Hold the System-Master for ca 1 second in the reading field of the Update-Terminal and
then remove it from the reading field.
The following signal appears:
1x long green and 1x long beep
The System-Master is now authorised for this Update-Terminal.
Troubleshooting:
Signalling
Reason
Solution
During step 1:
The System-Master does not have the cor
rect system identification code.
Use the System-Master with correct sys
tem identification code.
During step 2:
Update-Terminal
Page 23 of 41
7 Administration
