7.6 Activating the online mode of an Update-Terminal
Required master media:
l
RF-Ini-Master
For the activation of online mode it is
not
necessary to authorise the RF-Ini-Master in
advance.
Procedure:
4. Hold the RF-Ini-Master for ca 1 second in the reading field of the Update-Terminal.
Following signals appear:
A: 1x short green and 1x short beep
= successfully connected to the Access-Point
B: 1x long red and 1x long beep
= no connection to the Access-Point possible
C: 1x long green and 1x long beep
= Connection to the Access-Point existed already
5. Remove the RF-Ini-Master from the reading field.
The online mode is now deactivated.
Even if no connection was possible with the Access-Point, the Update-Terminal is now in
online mode. Once an Access-Point is found, it will connect itself automatically.
Update-Terminal
Page 29 of 41
7 Administration
