CERIO software core : cen_v3.0
5.12 Repeater AP MAC Filter Setup
Continue
Virtual AP Setup
section. For each Virtual AP setting, the administrator can allow or
reject clients to access each Virtual AP.
Action
: Select the desired access control type from the drop-down list; the options are
Disable, Allow or Reject.
Only Allow List MAC
: Define certain wireless clients in the list which will have granted
access to the Access Point while the access will be denied for all the remaining clients –
Action Type is set to “
Only Allow List MAC
”.
Only Deny List MAC
: Define certain wireless clients in the list which will have denied
access to the Access Point while the access will be granted for all the remaining clients -
Action Type is set to “
Only Deny List MAC
”.
MAC Access Control is the weakest security approach. WPA or WPA2 security methods
should be used when possible.
There are a maximum of
20
clients allowed in this “Enable” List. The MAC addresses of the
wireless clients can be added and removed to the list using the
Add
and
Remove
buttons.
