CERIO software core : cen_v3.0
4.6 Site Survey
Use this tool to scan and locate WISP Access Points and select one to associate with. Please click
on
Wireless
->
Site Survey
. Below depicts an example for site survey.
ESSID
: Available Extend Service Set ID of surrounding Access Points.
MAC Address
: MAC addresses of surrounding Access Points.
Signal/Noise dBm
: Received signal strength of all found Access Points.
RSSI :
Indicate the RSSI of the respective client's association.
Signal Quality (%) :
Received signal strength of all found Access Points.
Channel
: Channel numbers used by all found Access Points.
Security
: Security type by all found Access Points.
Select
: Click “
Select
” to configure settings and associate with chosen AP.
While clicking “Select” button in the Site Survey Table, the “
ESSID” and “Security Type” will
apply in the Wireless General Setup. However, more settings are needed including Security
Key.
