Cerio DT-300N, Руководство пользователя

Страница: 152 / 164

important to have a unique IP address as final destination to switch packets to.

Bridge table information : Select “Bridge Table information” on the drop-down list to display
bridge table.
Bridge table will show Bridge ID and STP's Status on the each Ethernet bridge and its
attached interfaces, the Bridge Port should be attached to some interfaces (e.g. eth2,
ra0~ra7 and wds0~wds3).

Bridge MACs Information : Select “Bridge MACs Information” on the drop-down list to
display MAC table.
This table displays local MAC addresses associated with wired or wireless interfaces, but
also remember non-local MAC addresses learned from wired or wireless interfaces.
Ageing timers will be reset when existing MAC addresses in table are learned again or added
when new MAC addresses are seen from wired or wireless interfaces as well. When time
runs out for a particular entry, it will be pruned from the table. In that situation, switching
packet to that particular MAC address will be dropped.