Cerio DT-300N, Руководство пользователя

Страница: 141 / 164

A classifier groups traffic into data flows according to specific criteria such as the source address,
destination address, source port number, destination port number or incoming port number. For
example, you can configure a classifier to select traffic from the same protocol port (such as FTP)
to form a flow.
Please click on “Advance”

“QoS”
※ Ba n d w id th Co n tro l

Service : The default is Disable, Select “ Disable ” or “ Enable” of QoS Service.

Mode : Can choose a total Bandwidth control or Per Rule Bandwidth control .

Total Bandwidth : the function is all customers use a total bandwidth.

Upload : Setting use upload control by total bandwidth

Download : Setting use download control by total bandwidth

Per Rule Bandwidth : Use the rules to define the classifiers. After you define the rules,
you can specify action to act upon the traffic that matches the rules
※ P e r Ru le

Comment : Enter a descriptive name for this rule for identifying purposes.

IP Address / IP segment : Specify local(LAN)/ destination IP addresses range required for
this rule. If you specify local IP addresses range from 192.168.1.1 to 192.168.1.254. The
matches a range of local IP addresses include every single IP address from the first to the
last, so the example above includes everything from 192.168.1.1 to 192.168.1.254.

Port : Specify local port(LAN port) range required for this rule.

MAC : Enter MAC address in valid MAC address format(xx:xx:xx:xx:xx:xx) and click “ Add ”

Application : the Layer 7 application control support “Bittorrent” , “eDonkey2000” ,
“FTP” and “HTTP”
。