Cerio DT-300N, Руководство пользователя

Страница: 125 / 164

6.12 Repeater AP MAC Filter Setup
Continue Virtual AP Setup section. For each Virtual AP setting, the administrator can allow or
reject clients to access each Virtual AP.

Action : Select the desired access control type from the drop-down list; the options are
Disable, Allow or Reject.

Only Allow List MAC : Define certain wireless clients in the list which will have granted
access to the Access Point while the access will be denied for all the remaining clients –
Action Type is set to “ Only Allow List MAC ”.

Only Deny List MAC : Define certain wireless clients in the list which will have denied
access to the Access Point while the access will be granted for all the remaining clients -
Action Type is set to “ Only Deny List MAC ”.
Notice: MAC Access Control is the weakest security approach. WPA or WPA2
security methods should be used when possible.
There are a maximum of 20 clients allowed in this “Enable” List. The MAC addresses of the
wireless clients can be added and removed to the list using the Add and Remove buttons.