8.
Align the OSPW Aero cage plate with the back
of the derailleur, inserting the spring post into
the low (L) tension setting on the cage (A). The
D shaped interface will not be aligned at this
time.
6.
Using the OSPW Aero front cage plate,
rotate the D-shaped center post inside the
derailleur counter clock wise until it stops.
Using a marker, mark the end of the center
post along the same line as shown on the
back of the OSPW Aero cage plate. Remove
the OSPW Aero cage plate.
5.
Unbox the CeramicSpeed OSPW system
and remove the rotation stop screw (to be
reinstalled once the cage is mounted).
Dissasemble the OSPW System by
removing all 4 bolts from the back of the
OSPW System. Set aside the 4 bolts, back
cage plate, and both pulley wheels.
7.
Mount the factory spring into the derailleur
body. Be careful to place the spring post
into the correct hole; Note: The correct hole
is deeper than all others.Ensure the spring
sits completely into the derailleur body all
the way around.
A
A
