Ceragon FA4800, Руководство пользователя

Страница: 308 / 333

MIB Parameters Appendix D
FA4800 User Manual Release 1.9.30 D-21
fibeAir4800IduEthernetIfIndex RO If Index corresponding to this Interface.
fibeAir4800IduEthernetIfAddress 1.3.6.1.4.1.4458.1000.2.3.1.1.5 DisplayString RO IDU MAC address.
fibeAir4800IduEthernetNumOfLanPorts 1.3.6.1.4.1.4458.1000.2.3.3 Integer RO Number of LAN interfaces in the IDU.
fibeAir4800IduEthernetNumOfSfpPorts 1.3.6.1.4.1.4458.1000.2.3.4 Integer RO The number of SFP interfaces in the IDU.
fibeAir4800IduEthernetSfpProperties 1.3.6.1.4.1.4458.1000.2.3.5 DisplayString RO SFP venfor properties : Vendor Name PN and
Revision.
fibeAir4800IduBridgeTpAging 1.3.6.1.4.1.4458.1000.2.4.4.2 Integer RW Timeout in seconds for aging. Note that for this
parameter to be effective the ODU must be
configured to HUB mode. A change is effective
immediately.
fibeAir4800IduTdmTxClockAvailStates 1.3.6.1.4.1.4458.1000.2.6.1.1 Integer RO Available states of the TDM Transmit Clock
Control each input status is represented by a bit.
When the state is available the bit value is 1.
When the state is unavailable the bit value is 0.
The available states are: bit 2 = Transparent bit
3 = Local Loop Timed bit 4 = Remote Loop Timed
bit 5 = Local Internal bit 6 = Remote Internal
fibeAir4800IduTdmTxClockDesiredState 1.3.6.1.4.1.4458.1000.2.6.1.2 Integer RW Required state of the TDM Transmit Clock Control.
A change is effective after re-activation of the TDM
service.
fibeAir4800IduTdmTxClockActualState 1.3.6.1.4.1.4458.1000.2.6.1.3 Integer RO Actual state of the TDM Transmit Clock Control.
fibeAir4800IduTdmMasterClockAvailOptions 1.3.6.1.4.1.4458.1000.2.6.2.1 Integer RO Available options of the TDM Master Clock Control
each input status is represented by a bit. When
the option is available the bit value is 1. When the
option is unavailable the bit value is 0. The
available options are: bit 2 = Automatic bit 3 =
Trunk #1 bit 4 = Trunk #2 bit 5 = Trunk #3 bit 6
= Trunk #4 When no options are available the
returned value is: 1
fibeAir4800IduTdmMasterClockDesired 1.3.6.1.4.1.4458.1000.2.6.2.2 Integer RW Required TDM Master Clock. A change is effective
after re-activation of the TDM service.
fibeAir4800IduTdmMasterClockActual 1.3.6.1.4.1.4458.1000.2.6.2.3 Integer RO Actual Trunk used for TDM Master Clock.
fibeAir4800IduTdmConfigTable N/A IDU TDM Links Configuration table.
fibeAir4800IduTdmConfigEntry N/A IDU TDM Links Configuration table entry. INDEX
{ fibeAir4800IduTdmConfigIndex }
fibeAir4800IduTdmConfigIndex RO Table index.
fibeAir4800IduTdmIfIndex RO Link index in the interface table.
fibeAir4800IduTdmLineCoding 1.3.6.1.4.1.4458.1000.2.6.6.1.6 Integer RW This parameter applies to T1 trunks only. The
parameter controls the line coding. Setting the
value to each of the indices applies to all. A
change is effective after the next open of the TDM
service.
fibeAir4800IduTdmLoopbackConfig 1.3.6.1.4.1.4458.1000.2.6.6.1.9 Integer RW Loop back configuration table. Each of the trunks
can be set Normal Line loop back or Reverse line
loop back. A change is effective immediately.
fibeAir4800IduTdmLineStatus 1.3.6.1.4.1.4458.1000.2.6.6.1.10 Integer RO Line status.
fibeAir4800IduTdmCurrentTable N/A IDU TDM Links Statistics table.
fibeAir4800IduTdmCurrentEntry N/A IDU TDM Links Statistics table entry. INDEX {
fibeAir4800IduTdmCurrentIndex }
fibeAir4800IduTdmCurrentIndex RO Table index (Same as
fibeAir4800IduTdmLineIndex).
fibeAir4800IduTdmCurrentBlocks 1.3.6.1.4.1.4458.1000.2.6.7.1.101 Counter RO Number of correct blocks transmitted to the line.
fibeAir4800IduTdmCurrentDrops 1.3.6.1.4.1.4458.1000.2.6.7.1.102 Counter RO Number of error blocks transmitted to the line.
fibeAir4800IduTdmCurrentTxClock 1.3.6.1.4.1.4458.1000.2.6.7.1.103 Integer RW TDM Transmit Clock. A change is effective after
re-activation of the TDM service.
Table D-2: Private MIB Parameters (Sheet 16 of 17)
Name OID Type
Acc
ess
Description