Ceragon FA4800, Руководство пользователя

Страница: 124 / 333

Setting the Date and Time Chapter 8
FA4800 User Manual Release 1.9.30 8-13
The link to the remote unit is now locked. If you repeat steps 1 and 2
above, the Security screen will look like this:
The Link Lock check-box is now unavailable.
5. If required, repeat the procedure for Site B.
Setting the Date and Time
The ODU maintains a date and time. The date and time should be synchro-
nized with any Network Time Protocol (NTP) version 3 compatible server.
During power-up the ODU attempts to configure the initial date and time
using an NTP Server. If the server IP address is not configured or is not
reachable, a default time is set.
When configuring the NTP Server IP address, you should also configure the
offset from the Universal Coordinated Time (UTC). If there is no server
available, you can either set the date and time, or you can set it to use the
date and time from the managing computer. Note that manual setting is not
Note
To revert the Link Lock status to unlocked, power down each ODU
in turn. Use the above procedure to uncheck the Link Lock status
box for the live ODU.
A simple ODU reset at either end will restore the link to its previous
locked or unlocked state.