Ceragon FA4800, Руководство пользователя

Страница: 289 / 333

Community String Appendix D
FA4800 User Manual Release 1.9.30 D-2
link. Both agents communicate with each other over the air using a proprie-
tary protocol.
To control and configure the device using the MIB, you should adhere to the
following rules:
• The connection for control and configuration is to the local site, over
any SNMP/UDP/IP network.
• All Parameters should be consistent between both of the ODUs. Note
that inconsistency of air parameters can break the air connection. To
correct air parameters inconsistency you must reconfigure each of
the ODUs.
• Common practice is to configure the remote site first and then to
configure the local site.
• For some of the configuration parameters additional action must be
taken before the new value is loaded. Please refer to the operation
in the parameters description.
• Some of the MIB parameters values are product dependent. It is
strongly recommend using the FibeAir2000 Manager Application for
changing these values. Setting wrong values may cause indetermi-
nate results.
Community String
To control a link, all SNMP requests should go to the local site IP address.
See Table 4-4 for default Community strings.
Private MIB Structure
The sections in the private Ceragon MIB and its location in the MIB tree are
shown in
Figure D-1 below:
Note
Each ODU has a single MAC address and a single IP address.