Centrix SA1DK Скачать руководство пользователя

Страница: 3 / 16

Electrical Characteristics

Operating Voltage Range :

12 to 16V DC

From a Regulated Power Supply

Maximum Input Current :

Standby : 20mA

Not including attached devices

Max : 60mA

Not including attached devices

Relay Outputs :

Lock Strike Relay

Electronic, 3.5A

with built in suppressor protection

Inputs :

REX

N.O., Dry Contact

LEDs

Two Tri-colored LEDs

Environmental Characteristics

Operating Temperature :

-25°F to 145°F (-31°C to 63°C)

Operating Humidity:

0 to 95% (Non-Condensing)

Mechanical Characteristics

Dimensions:

3.62 “ (92 mm) L x 3.62: (92 mm) W x 0.94” (24 mm) D

Weight :

0.3 lbs (130g)

Here are some of the SA1DK’s key features:

• Built in Keypad for PIN code entry

• Internal Buzzer

• Comes with security screw and security screw tool

• Two Status / Programming Interface LED’s

• Three User Levels

• (Normal User, Secure User, Master User)

• Three Modes of Operation

• (Normal Mode, Bypass Mode, Secure Mode)

• “Code Search” feature makes maintaining user codes easier

• Input for Request to Exit (REX) button

• Lock Strike Electronic Relay with built-in suppressor protection

• Comes with mounting template for easier installation

• Built in Case and Back Tamper

• Bell, Chime, Siren and Strobe features available with BL-D40

• Bell, Chime, Siren, Battery Backup, Tamper Output (Open Collector 20mA) features

available with PS-X41 (Output Power 1.2A) and PS-X42 (Output Power 1.8A)

• Programmable Siren Time

• Programmable Lock Strike Release Time

• Comes with Suppression Diode (1N4004)

Technical Specification

Key Features

Содержание SA1DK

















Результаты поиска

Содержание SA1DK

Отзывы:

Похожие инструкции для SA1DK

Бренды по названию

Популярные бренды

Centrix SA1DK, Инструкция по эксплуатации

Результаты поиска

Содержание SA1DK

Отзывы:

Похожие инструкции для SA1DK

Бренды по названию

Популярные бренды