on the basis of the distinctive ring. If you want Distinctive Ring numbers handled
the same way as your 'Main' number, do not place a check mark in the box.
Next, enter the 'Distinctive Ring' telephone number for each of the Distinctive
Ring numbers associated to this line. Distinctive Ring 1 corresponds to any
double ring pattern. Distinctive Ring 2 corresponds to any triple ring pattern.
In the “Other telephone company services” section:
Select any of the Telephone Company Services that you currently have for each
line. The following is an explanation of each service and the impact of selecting
each option with respect to how TalkSwitch handles calls.
3-Way Calling/Conference/Centrex Transfer:
If you select this option, TalkSwitch can work with this service to
forward calls to Remote Extensions or other external phone numbers
while using the same line (Same Line Connect). You can also use this
service as an option for bridging calls to external numbers when
calling into TalkSwitch from the outside. See Appendix B for a
definition of 3-Way Calling/Conference and Centrex.
Call Waiting:
Enable this option if you have Call Waiting service on the current
line.
Any other Flash activated service:
Enable this option if you use any other service that requires the use
of a flash or link key other than 3-Way Calling/Conference, Transfer
or Call Waiting.
Caller ID:
Enable this option if the current line provides Caller ID information
(service provided by your local telephone company). TalkSwitch will
pass on the Caller ID information to selected extensions. Also,
TalkSwitch can use the time information provided by Caller ID to
update TalkSwitch’s internal clock. (see section 2.3.4.3).
Telephone Company Voicemail:
Enable this option if you are subscribed to a Telephone Company
Voicemail service. If this service is enabled on a specific line, calls
can be routed to this voicemail service.
Hunt/Rollover:
Enable this option if the current line is associated with a Line Hunt or
Line Rollover service from the Telephone Company. You cannot use
the Auto Callback feature on that particular line if you have Hunt or
Rollover enabled. In general, any lines that belong to a Hunt/Rollover
group should be configured to handle calls the same way.
15
2.0
Configuring Talkswitch
