There are four Call Bridge accounts activated by passwords. Each account can be
configured to allow access to certain Hunt Group(s) when using Call Bridge. To
activate an account, check the ‘Activate Call Bridge’ box and fill in a 4 to 8 digit
password. Next, select ‘Hunt Group Access’ and assign the Hunt Groups you want to
make available for this account.
Call Bridge account passwords are only valid when using Call Bridge by itself, not
when used in conjunction with Call Back.
2.3.4 Options
2.3.4.1 Administrator Password
This tab allows you to set up the Administrator password for TalkSwitch. The
Administrator password gives access to all configuration options. The password that
is entered here will be used at configuration start-up and through DTMF
configuration.
Administrator password:
To activate the use of an administrator password, enter a 4 to 8 digit password
and then confirm the password. Next, click the ‘Verify Password’ button to have
the software validate the password.
If there is a problem with the password, you will need to re-enter the password
and then confirm it. If you do not want a password or want to delete the
45
2.0
Configuring Talkswitch
