Page 4
SKU 91044
For technical questions, please call 1-800-444-3353.
22.
Fire fasteners into an appropriate work surface only
. Do not attempt to fire
fasteners into surfaces too hard to penetrate. Do not drive fasteners on top of other
fasteners, or at too steep of an angle. Fasteners can ricochet causing personal injury.
23.
Do not fire fasteners too close to the edge of a workpiece
. They may split the
workpiece and fly free, causing personal injury.
24.
Disconnect air supply before loading Nailer
. Before reloading (or making any
adjustments) to the Nailer make sure that the compressed air is disconnected.
25.
Take caution as some woods contain preservatives such as copper chromium
arsenate (CCA) which can be toxic
. When stapling or nailing these materials extra
care should be taken to avoid inhalation and minimize skin contact.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals known [to the State of California] to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement or other masonry products
• Arsenic and chromium from chemically treated lumber
(California Health & Safety Code § 25249.5,
et seq. )
26.
Stay within air pressure capacity
.
Never operate the Nailer above 125 PSI.
27.
Hold tool away from head and body
. During operation the Nailer may kick back causing
injury.
28.
Transport Nailer safely
. Always disconnect air supply when moving the tool in the
workplace. Carry the tool by the handle and avoid contact with the trigger.
Note
: Performance of the compressor (if powered by line voltage) may vary depending on
variations in local line voltage. Extension cord usage may also affect tool
performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Rev 11/06
