Page 5
SKU 39092
For technical questions, please call 1-800-444-3353.
24.
Do not fire fasteners too close to the edge of a workpiece.
They may split the
workpiece and fly free, causing personal injury.
25.
Take caution, as some woods contain preservatives such as copper chro-
mium arsenate (CCA) which can be toxic.
When stapling or nailing these
materials extra care should be taken to avoid inhalation and minimize skin con-
tact.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contain chemicals known (to the State of Cali-
fornia) to cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
* Lead from lead-based paints
* Crystalline silica from bricks and cement and other masonry products
* Arsenic and chromium from chemically treated lumber.
(California Health & Safety Code § 25249.5,
et seq.)
26.
Stay within air pressure capacity.
Never operate the Nailer above 125 PSI.
27.
Hold tool away from head and body.
During operation the Nailer may kick back
causing injury.
28.
Transport Nailer safely.
Always disconnect air supply when moving the tool in
the workplace. Carry the tool by the handle to avoid contact with the trigger.
29.
Avoid working alone.
If an accident happens, an assistant can bring help.
Note:
Performance of the compressor (if powered by line voltage) may vary depending
on variations in local line voltage. Extension cord usage may also affect the tool
performance.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure all parts shown in the Parts List on page 11
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number on the cover of this manual as soon as possible.
REV 11/06
