Page 2
SKU 39092
For technical questions, please call 1-800-444-3353.
Specifications
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean.
Cluttered areas invite injuries.
2.
Observe work area conditions.
Do not use machines or power tools in damp or
wet locations. Do not expose to rain. Keep work area well lit. Do not use electri-
cally powered tools in the presence of flammable gases or liquids.
3.
Keep children away.
Children must never be allowed in the work area. Do not
let them handle machines, tools, extension cords, or air hoses.
4.
Store idle equipment.
When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job.
Do not attempt to force a small tool or attach-
ment to do the work of a larger industrial tool. There are certain applications for
which this tool was designed. It will do the job better and more safely at the rate
for which it was intended. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
Item Description
Operating Air Pressure
70-125 PSI *
Air Consumption
3 CFM (Non-continuous)
Magazine Capacity
100 Brads
Brad Length Capacity / Gauge Size
1-1/4” to 2-1/2” / 16 Gauge
Air Inlet
1/4”-18 NPT
Trigger Mechanism Type
Contact Safety Trip Mechanism
Overall Dimensions
12-1/2” L x 2-5/8” W x 10-1/4” H
Tool Weight
5-5/8 Pounds
* The air pressure setting must not exceed job site regulations/restrictions. The
air pressure setting must not exceed 90 PSI when being used with work pieces
that have a thickness of less than 1-3/4”.
REV 11/06
