background image

Page 5

SKU 95906

For technical questions, please call 1-800-444-3353.

Maintain labels and nameplates on the Mortar Mixer.  

These carry important 

information.  If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.

Maintain a safe working environment.  

Make sure there is adequate surrounding 

workspace.

Avoid unintentional starting.  

Make sure you are prepared to begin work before 

turning on the Mortar Mixer.

People with pacemakers should consult their physician(s) before use.  

Elec-

tromagnetic fields in close proximity to a heart pacemaker could cause pacemaker  
interference or pacemaker failure.  Caution is necessary when near the Engine’s 
magneto or recoil starter.

never leave the Mortar Mixer unattended when it is running.  

Turn off the Engine 

of the Mortar Mixer before leaving the work area.

Always use the Mortar Mixer on a flat, level, dry ground surface and chock 
both wheels to prevent accidental movement of the unit.

Make sure to keep hands and fingers away from all moving parts of the Mortar 
Mixer.

This Mortar Mixer is not designed for highway use.  

Do not exceed 45 miles 

per hour when towing the Mortar Mixer.  Excess speed is a major cause of vehicle/
Mortar Mixer accidents.

Prior to towing the Mortar Mixer make sure to read and understand all instruc-
tions and safety precautions as outlined in the owner’s manual for the towing 
vehicle.  

Make sure the towing vehicle is capable of towing the Mortar Mixer (weight 

approximately 

600

 pounds empty).  Make sure the hitch on the towing vehicle is 

capable of towing the Mortar Mixer.  The towing capacity of the hitch is typically 
stamped on the hitch drawbar.

Make sure the Tow Chains are properly connected to the towing vehicle.  

Do 

not allow the Chains to drag the ground surface when towing.

The Engine Protection Cover (38) of the Mortar Mixer must always be closed 
when the Engine is running.  

Do not cover the Engine Protection Cover with can-

vas/plastic tarps, boards, tools, etc. when the Engine is running.

Prior to using the Mortar Mixer, make sure to read and understand all instruc-
tions and safety precautions as outlined by the concrete supplier.

keep all safety guards of the Mortar Mixer in place and in proper working 
order.

Care must be taken when backing up the Mortar Mixer.  

Only back up the Mixer 

on a straight path.  If the Mixer is allowed to turn off the straight path while backing 

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

Содержание 95906

















Отзывы: