background image

Page 2

SKU 95906

For technical questions, please call 1-800-444-3353.

sPECIFICATIOns

Drum Capacity

6 Cubic Feet

Batch Capacity

1-1/2 to 2 Bags of cement

Wheel to Wheel Measurement 37-5/8” Long (Extendable axle from 36” to 46”)
Tires

Qty. 2 / 60 PSI (Cold) / 4.80/400-12 / Maximum Load: 1,000 Lb. Each

Drive & Clutch

V-Belt to Gears / Front Post Hand Clutch

Drum Speed

2-Speed Operation (20 & 36 RPM)

Drum Opening

24-1/8”L x 23-3/4”W

Drum Lock

Spring Loaded Handle

V-Belts

A889 (Qty. 2) / A950 (Qty. 2)

Road/Speed Limitations

Not for Highway Use /  55 MPH Maximum Speed

Engine

8.0 HP B & S

®

 / Air Cooled / Recoil Start / Unleaded Gasoline Powered 

Fuel Tank Capacity: 4 Quarts / Engine Oil Capacity: 28 Ounces
Family: 6BSXS.3422HT 276306 / Model 202432 / Type 0036E1
Engine Approvals*: 2006 California EVH & EVP Emissions
                               2006 E.P.A. Phase II

Operating Weight

560 Lb. (Empty)

IMPORTAnT!

This  product  requires  oil and fuel to be added before starting.  Attempting  to start the Engine 

without oil wIll ruin the Engine and void the warranty.

nOTE:

The Engine’s carburetor may need to be adjusted by a qualified mechanic for efficient

high-altitude use.

* The emission control system for this Mortar Mixer’s Engine is warranted for standards set by the 
U.s. Environmental Protection Agency and by the California Air Resources Board (also know as 

CARB).  For warranty information, refer to the last pages of this manual.

sAVE THIs MAnUAl

You will need this manual for the safety warnings and precautions, assembly, oper-

ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.  
Keep your invoice with this manual.  Write the invoice number on the inside of the front 
cover.  Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number.  Keep this manual 
and invoice in a safe and dry place for future reference.

REV 07f

07h

Содержание 95906

















Отзывы: