Page 28
SKU 95112
for technical questions, please call 1-800-444-3353.
Align the Drive Pulley (40D) and Motor Pulley (80D). To do so, adjust the Motor
Mount Plate (71D) so that the Drive Pulley and Motor Pulley are directly in line
and parallel (use a straight edge if necessary).
Once the Drive Pulley (40D) and Motor Pulley (80D) are aligned, firmly
tighten
the Hex Head Bolts (72D) on the Motor Mount Plate (71D).
If necessary, adjust Pulley alignment again by loosening the Setscrew (81D) on
the Pulley. Then, move the Pulley until they are both aligned and retighten the
Setscrew.
The V-Belts (82D) are tensioned by raising or lowering the Motor (53E). Loosen
the tension adjusting Hex Head Bolts (35D). Lower the Motor, and allow the
weight of the Motor to tension the V-Belts. Correct tension is obtained when
there is approximately 1/4” deflection of the V-Belts at the center span of the
Drive Pulley (40D) and Motor Pulley (80D). Do not over tension. Then, retighten
the tension adjusting Hex Head Bolts (35D) securely.
to replace the saw blade:
Refer to instructions beginning on page 13 of this
manual.
caution!
All maintenance, service, and repairs not mentioned in this manual
must only be performed by a qualified service technician.
please read tHe following carefully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEM-
BLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER
THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR
SHE IS qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
record
product’s serial number Here:
note:
If product has no serial number, record month and year of purchase instead.
note:
Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.
e.
f.
g.
h.
10.
11.