Page 14
SKU 95112
for technical questions, please call 1-800-444-3353.
HeigHt
Hand wHeel
(36e)
tilting
Hand wHeel
(30e)
blade
insert
(6e)
power off
power on
power switcH
(17e)
warning!
Make sure to install saw blade
with its teeth facing down toward
the front of the table saw.
10” saw blade
(86d)
(not included)
blade
flange
(5d
arbor nut
(4d)
arbor
eXtension
(6d)
scrap wood
to
tigHten
arbor nut
(4d)
figure f
To install a 10” diameter Saw Blade (86D), place the new Saw Blade on the Arbor
Extension (6D) with its teeth pointing
downward
toward the front of the Table Saw.
Then, wedge a piece of scrap wood at the back of the Saw Blade.
(see figure f.)
warning!
The teeth of the Saw Blade (86D)
Must
point downward toward the
front of the Table Saw to work properly. If not, personal injury and/or property dam-
age can occur.
(see figure f.)
Place the Blade Flange (5D) and Arbor Nut (4D) on the Arbor Extension (6D). Make
sure the dome side of the Blade Flange faces out from the Saw Blade (86D). Then,
tighten the Arbor Nut securely.
(see figure f.)
6.
7.
8.