SKU 32206/32208
For technical questions, please call 1-800-444-3353.
PAGE 20
FigUre FOr Step 8-5
5. Position the Saw Blade (20B) through
the upper Blade Guides (29B) and over
the Upper Pulley (16B).
FigUre FOr Step 8-6
6. Place the Saw Blade (20B) on the Lower
Pulley (19B) and through the lower Blade
Guides (32B).
Replace the Table Insert (37B) and Table
7.
Pin (38B).
FigUre FOr Step 8-8
12B
12B
13B
8. Place the Column Blade Guard (13B)
onto the two Studs (12B) and over the
Saw Blade (20B) as shown above.
FigUre FOr Step 8-9
21B
22B
70B
9.
Dust Chute Setup (Optional)
If you will attach a dust collector to this
bandsaw, attach the Dust Chute (22B) to
the Lower Pulley Guard (21B) using the
Bolts (70B) as shown above.
