SKU 32206/32208
For technical questions, please call 1-800-444-3353.
PAGE 23
FigUre FOr StepS 8-25 tO 8-26
BeAriNg
ADjUStmeNt
thUmB BOlt
(44B)
BlADe gUiDe
ADjUStmeNt
thUmB BOlt
(44B)
25. Loosen the two blade guide adjustment
Thumb Bolts (44B) and move the lower
Blade Guides (32B) as close as pos-
sible to the side of the Saw Blade without
touching it. Then, tighten the Thumb
Bolts.
Loosen the bearing adjustment Thumb
26.
Bolt (44B) and adjust the Bearing (47B)
to 1/64” (0.4mm) behind the Saw Blade.
Then, tighten the Thumb Bolt.
Return the Table (36B) to its normal posi-
27.
tion and secure with the Knobs (15B)
Replace the Upper and Lower Pulley
28.
Guards (14B, 21B), and secure them
with the four Knobs (15B).
FigUre FOr Step 8-29
15B
84B
29. If a Dust Chute (22B) was not installed
to the Lower Pulley Guard (21B), install
the Lower Guide Cover (84B) onto the
Stud (12B) under the table as you install
the Knobs, see above. Adjust the Cover
over the Guide assembly and secure the
Cover in place with the Knob.
