SKU 32206/32208
For technical questions, please call 1-800-444-3353.
PAGE 18
FigUre FOr Step 7-2
61B
24B
27B
26B
14B
25B
2. Loosen the Bolt (61B) on the side of the
Upper Guide Support (27B). Slide the
Blade Guard (26B) up into the Upper
Pulley Guard (14B) and then the Upper
Guide Support (27B) onto the end of
the Guide Post (24B). Align the Upper
Guide Support (27B) and tighten the Bolt
(61B) to secure it.
Remove the Bolt (86B), Nut (85B), and
3.
Washer (87B) from the Guide Post Cover
(83B).
Hold the Upper Guide Support (27B)
4.
while you remove the Knob (25B). Gen-
tly lower the Upper Guide Support.
FigUre FOr Step 7-5 tO 7-7
25B
83B
86B
5. Hold the Guide Post Cover (83B) against
the Upper Frame Arm (1B) as shown
above. Thread the Knob (25B) back into
the Upper Frame Arm (1B) through the
hole.
Thread the Nut (85B), then the Washer
6.
(87B) onto the Bolt (86B), then thread
the Bolt into the Upper Frame Arm (1B)
as shown. Tighten the Nut (85B) against
the Guide Post Cover (83B) to secure it
in place.
Align the Guide Post (24B) if needed and
7.
secure in place with the Knob (25B).
