Adjustment of Lower Cutting Blade
Step 1: Lower the upper BLADE (#23) to its lowest position.
Step 2: Loosen the two inset HEX SCREWS (#59) located on top of the WORK TABLE (#2) as
shown in Figure 4.
Step 3: Adjust the lower cutting BLADE by turning its ADJUSTMENT SCREWS (#61) as
shown in the Parts Diagram on page 13. The distance between the lower cutting
BLADE and the upper cutting BLADE should be 5 to 8 percent of the thickness of the
workpiece.
Step 4: Tighten the two inset HEX SCREWS (#59) located on top of the cutting blade.
Page 6 -- SKU: 05907
REV 11/02
