Page 4
SKU 37555
OPeRaTIOn
1. Release the Lock Pin (20) located on the Post (02), and swivel the Post so that the
Boom (04) is pointing towards the object to be lifted.
2. Position the Hook and Steel Cable (10) over the article to be moved by adjusting and
locking the Extendible Boom (07) in place using the Boom Extendible Pin (08).
Do not exceed the weight limits of the lift (See specification table).
3. Hook around the article so that its weight is centered.
4. Place the slotted end of the Jack Handle (21) over the Jack release valve, and close it
by turning it in a clockwise direction.
5. Insert the Jack Handle into its connector and lift the Boom by pumping the handle in
an up and down motion.
6. When the article has been lifted to the desired height, it may be moved over the truck
bed by slowly swiveling the Post (02) until the article is directly over the truck bed.
do not attempt to extend the Boom further while the article is still attached. If
the article needs to be moved further out, lower it, then adjust the Boom and re-
lift it.
7. Lower the article onto the truck bed by using the Jack Handle (21) to slowly turn the
pump release valve in a counterclockwise direction.
8. Reverse previous steps to remove article from truck bed.
9. Secure boom over truck wheel well using the Lock Pin (20).
