Page 3
SKU 37555
15. When servicing, use only identical replacement parts. Use of any other parts will
void the warranty. Only use accessories intended for use with this tool. Approved
accessories are available from Harbor Freight Tools.
16. Do not wear loose clothing or jewelry when operating. Wear protective hair covering
to protect long hair. Uncovered long hair can get caught in moving parts.
17. Always set pickup truck parking brake and block tires when using lift. Vehicles with
automatic transmissions should be left in “park.” Manual transmissions should be left
in gear. Never attempt to lift something while the vehicle is moving.
18.
Do not operate tool if under the influence of alcohol or drugs
. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
UnPaCKIng
Open box and examine components. Look for any loose parts in the packing material
before discarding. If any are found, try and find the part on the parts list or on the exploded
view of the lift, and reinstall the part. If any part of the machine is missing or broken, please
call Harbor Freight Tools at the number on the front cover as soon as possible.
aSSemBLy
While assembling the truck lift, refer to the Assembly Parts Illustration on the last page.
1. Place the Base (01) in the location on the truck bed where it is to be secured. This
flat location must be able to support the lift with a 1000 lb. load. (On most trucks, a
desirable position is just behind the wheel so that the boom may be stored over the
wheel well.)
2. Using a pencil, mark through the mounting holes in the lift base (01) to mark drill
holes.
3. Using a power drill and appropriate drill bit size, drill holes through truck bed.
4. Place the bolts (22) through the Base and into the truck bed holes.
5. Place each Angle Steel (11) plate under the truck bed, over the protruding bolts (22),
and secure with the washers (23), spring washers (24), and finally the nuts (25), as
shown in the Assembly Parts Illustration. Tighten nuts (25) securely.
6. Place the Post (02) upper lift assembly onto the Base (01). Insert Lock Pin (20).
Warning:
The Lift has four extension settings for the Extendible Boom. Each setting has a
weight limit that is clearly marked on the Boom. Do not exceed these weight limits as
it may
cause damage to the Pick Up Truck Lift and/or cause bodily injury.
