background image

Page 5

SKU 37555

maInTenanCe

1.  Clean and lubricate all moving parts including gears, ratchets, and shafts to insure 

safe operation.  When not in use, keep clean, dry, and covered.

2.  Purge air from hydraulic system when jack does not lift efficiently.

3.  Replace hydraulic oil once per year.

Purging air from the Hydraulic System

note:

 Occasionally, air bubbles can become trapped inside the hydraulic system thereby 

reducing the efficiency of the jack.  Purge air from the system as needed.

1.  Place the slotted end of the Jack Handle (21) over the valve release screw.
2.  Turn the valve release screw (not shown) 1-1/2 turns counterclockwise using the Jack 

Handle.

3.  Remove the oil filler plug on the side of the Jack (not shown) by gently pulling and 

turning.

4.  Rapidly pump the Jack Handle several times to purge air from the hydraulic system.
5.  Turn the valve release screw clockwise until snug using the Jack Handle.

6.  Replace the oil filler plug.

Replacing Hydraulic System Oil

Caution:

 Replace the oil once per year, or more often with heavy use.  Do not permit dirt or 

any substance other than high quality hydraulic jack oil to enter the hydraulic system.  

Do not mix different kinds of oil together.

1.  Remove the Jack (12) from the lift and place in an upright position.

2.  Completely lower ram.

3.  Remove the oil filler plug (not shown) from the Jack.
4.  Fill with high-quality hydraulic jack oil to the lower rim of the fill hole.

5.  Purge air from the system as previously described.
6.  Top off with more hydraulic jack oil.

7.  Replace the oil filler plug.

Содержание 37555








Отзывы: