CentoLight PORTRAIT Tondo Set, Руководство пользователя

Страница: 15 / 44

15 15
PORTRAIT TONDO Set User Manual
Eng
example, that a DMX controller connected to a 2.4 GHz transmitter can control more
than one PORTRAIT TONDO simultaneously, which is a very common application in
case of multiple PARs in a flight case, like the PORTRAIT TONDO. Of course, the two
or more receivers must be placed within 300m from the transmitter.
Another common application is, for example, if in a venue with two dance floors
(let’s call them “zones”) you want to control both with the same controller. The only
advise is that the fixtures in Zone A must use DMX channels other than those used in
Zone B.
NOTE: If two transmitters are active simultaneously on same ID, although there
is no risk of damage to the equipment, we do not recommend to use two or
more transmitters on same ID value, as this is absolutely useless.
1) ID code and LED Color
DMX data communication occurs only if transmitter an receiver are both under same
ID code. Users can assign a fixture to one of the 7 available bands (or groups) by
pressing “ID SEL” button several times. Each ID has a different assigned color as
shown in next table.
ID COLOR
1 Red
2 Green
3 Red + Greed = Yellow
4 Blue
5 Red + Blue = Magenta
6 Green + Blue = Cyan
7 Red + Green + Blue = White
This means that the combination Transmitter-Receiver allows the light designer to
use up to 7 x 512 DMX channels in the same venue.
2) Wireless DMX Operation
To use this feature, please enter the menu and press MENU button till you don’t
reach the 2.4G function. Then press ENTER button and set the function to ON by
pressing the UP or DOWN button. Finally, Press ENTER to confirm. The red LED on
front panel will lit, confirming you that the wireless function is active.
Now you need to set up the transmitter in order to match the ID1 group (Red color
LED). Please refer to the transmitter user manual for further information.
Once communication is established (red LED will be always lit, you have to adjust
the PORTRAIT TONDO DMX channel in order to match the controller (e.g.: if your PAR
is in 6-Channel mode, and DMX channel is set to 1, the controller can adjust values