CentoLight PORTRAIT Tondo Set, Руководство пользователя

Страница: 13 / 44

13 13
PORTRAIT TONDO Set User Manual
Eng
2,4G on

off
Wireless DMX setup (Default is off)
t000 off

40

100
Fixture Temperature. Default is Off
(Press ENTER to setup fixture power and
reduce the temperature)
r255 r001

r255
Manual Color Mode Red
G255 G001

G255
Manual Color Mode Green
b255 b001

b255
Manual Color Mode Blue
U255 U001

U255
Manual Color Mode White
Y255 Y001

Y255
Manual Color Mode Yellow (Amber)
P255 P001

P255
Manual Color Mode Purple (UV)
5 - dMX C
onTrol
5.1. Wired DMX Control
DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy
Chain connection is where the DATA OUT of one fixture connects to the DATA IN of
the next fixture. The order in which the fixtures are connected is not important and
has no effect on how a controller communicates to each fixture. Use an order that
provides for the easiest and most direct cabling.
DMX Terminator
Unit 1 Unit 2 Last Unit
DMX 512
3-Pin XLR
Pin 1: GND
Pin 2: DMX -
Pin 3: DMX +
OUTPUT INPUT
DMX use of 3-Pin XLR Connectors
Connect machines using shielded 2-conductor twisted pair cable with 3-pin XLR
male to female connectors. The shield connection is pin 1, while pin 2 is Data Nega-
tive (S-), and pin 3 is Data positive (S+).
When use a DMX controller, please make sure that there is no interference
sources (e.g. intercom, high frequency radio waves and radiation source).
CAUTION: Wires must not come into contact with each other; otherwise the fix -
tures will not work at all, or will not work properly.