5
ENGLISH
ELECTRO-HYDRAULIC PUMP
1. GENERAL CHARACTERISTICS
WARNING!
– When electrical equipment is used, basic safety precautions must be followed to reduce fi re
danger, electric shock and personal injury.
– Ensure the ON-OFF switch is in “0” position (off ) before connecting the pump to the mains supply.
– The operator should concentrate on the work being performed and be careful to maintained a
balanced working position.
– Hydraulic pumps manufactured by
Cembre S.p.A.
are developed for use with crimping or
cutting
heads. According to this specifi c use, they do not need and are not equipped with
an oil non-return safety system.
For this reason, use in applications diff erent from those intended (for example with hydraulic
jacks, lifting systems or similar) can be dangerous for the operator.
Cembre S.p.A.
does not accept any liability arising from the use of its hydraulics pumps
for applications different from those listed in its catalogues or other documentation.
PUMP TYPE:
CPE-1
CPE-1-110
CPE-1-MG
CPE-1-110-MG
Max. operating pressure
bar (psi):
700 (10,000)
500 (7,250)
Oil supply
litres/min (gpm):
0,8 (0.21)
Single-phase electric motor:
supply voltage Volt/Hz:
current Ampere:
230 ~ / 50-60
110-115 ~ / 50-60
230 ~ / 50-60 [CPE-1-MG]
110-115 ~ / 50-60 [CPE-1-110-MG]
4,8 (50 Hz)
4,6 (60 Hz)
9,6 (50 Hz)
9,2 (60 Hz)
9,6 [CPE-1-MG]
9,2 [CPE-1-110-MG]
Power
Watt (HP):
1050 (1.4)
Control circuits
Volt:
24 DC
Oil reservoir capacity
litres (gal.US):
2,0 (0.52)
Weight
kg (lbs):
21 (46)
Dimensions
mm (inches):
372 x 223 x 482 (14.6 x 8.8 x 19)
Ingress protection:
IP 55
Recommended oil:
ENI ARNICA ISO 22 or ESSO INVAROL EP 22 or equivalent
Remote hand controller:
×
Remote pedal controller:
×
Safety:
The pump is fi tted with a maximum pressure valve and pressure switch; MPC1 gauge (see page 38) is
available as an optional accessory to check the correct setting of the pressure switch.
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent A
at the work place L
pA
is equal to ...............................................................................................................................73 dB (A)
– The maximum value of the weighted acoustic displacement pressure C
at the work place L
pCPeak
is ..................................................................................................................................... < 130 dB (C)
– The acoustic power level emitted by the machine L
WA
is equal to ..........................................................................................................................................................................88 dB (A)
Содержание CPE-1
Страница 4: ...4 IM FIG 1 PUMP POMPE PUMPE BOMBA POMPA IR TF CA MT QE PO LA C IG PS F PF PC...
Страница 37: ...37 FIG 6 TL FIG 7 TV...
Страница 38: ...38 C2 C1 SE R RC RL TR PR EV FIG 8...
